LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2007 >> Outlander ES >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Chassis Electrical >> Alarm System >> Theft Alarm >> Inspection >> Theft-Alarm Indicator Check

Theft-Alarm Indicator Check

  1. Remove the center panel.
  2. Connect the battery (+) terminal with the center panel connector (terminal No. 15). Then, check if the theft-alarm indicator is illuminated when the battery (-) terminal and the center panel connector (terminal No. 12) are connected.
  3. If the theft-alarm indicator is illuminated, it is judged good.
    Fig 1: Identifying Hazard Warning Light Switch Connector Terminals
    G04873741Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals