LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2007 >> Galant DE >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension & Wheel Alignment >> Shock Absorber Assembly >> Disassembly And Assembly >> Assembly Service Points >> >> A << Coil Spring Installation

>> A << Coil Spring Installation

CAUTION: Do not use an impact wrench to tighten the bolt of special tool MB991237. It will break the special tool.
  1. Use special tools MB991237 and MB991239 to compress the coil spring, and install it to the spring seat of the shock absorber.
  2. Align the end of the coil spring with the stepped section of the spring seat of the shock absorber.
    Fig 1: Compressing Coil Spring
    G04255224Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals