Inspection Procedure 3: Body Tilting: Diagnosis
- STEP 1. Check for weak or deteriorated bushings.
Q: Are the bushings in good condition?
YES: Go to Step 2.
NO: Replace the faulty part, and then go to Step 5.
- STEP 2. Check for weak or broken coil springs.
Q: Are the coil springs in good condition?
YES: Go to Step 3.
NO: Replace the faulty part, and then go to Step 5.
- STEP 3. Check the upper arms and/or lower arms and/or toe control arms for deformity or damage.
Q: Are the upper arms and/or lower arms and/or toe control arms deformed or damaged?
YES: Replace the faulty part, and then go to Step 5.
NO: Go to Step 4.
- STEP 4. Check the trailing arms for deformity or damage.
Q: Are the trailing arms deformed or damaged?
YES: Replace the faulty part, and then go to Step 5.
NO: Go to Step 5.
- STEP 5. Retest the system.
Q: Is the malfunction eliminated?
YES: The procedure is complete.
NO: Return to Step 1.