>> A << Windshield Spacer/Glass Stopper/Windshield Upper Molding/Windshield Side Molding Installation
WARNING: This page is about a different variant/trim than selected.
CAUTION:
Leave the degreased parts for 3 or more minutes to dry well, before starting on the next step. Do not touch the degreased parts.
- Use 3M™ AAD Part number 8906 or equivalent to degrease the inside and outside of the windshield and the body flanges.
- Install the windshield spacer and glass stoppers to the specified positions so that there are no adrift or warped surfaces inside the windshield.
- Install the windshield upper and side moldings to the windshield.