LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2007 >> Galant DE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Body) >> Keyless Entry System >> On-Vehicle Service >> Enabling/Disabling The Hazard ANSWERBACK Function >> How To Adjust Hazard ANSWERBACK When The Transmitter Is Used To Unlock Doors

How To Adjust Hazard ANSWERBACK When The Transmitter Is Used To Unlock Doors

WARNING: This page is about a different variant/trim than selected.
  1. Remove the ignition key.
  2. Push the "unlock" button and then push the "lock" button after 4 seconds to 10 seconds.
  3. Release the "unlock" button and then release the "lock" button within 10 seconds after Step  2. The ETACS-ECU tone alarm will sound, indicating that the hazard answerback function can be enabled or disabled when the door are unlocked.
    • Enable the hazard answerback function when the doors are unlocked: The ETACS-ECU tone alarm will sound once. 
    • Disable the hazard answerback function when the doors are unlocked: The ETACS-ECU tone alarm will sound twice. 
scientia non olet · About LEMON Manuals