Inspection Procedure 2: Door Window Glass Malfunction: Diagnosis
WARNING: This page is about a different variant/trim than selected.
- STEP 1. Check the door window glass installation condition.
Q: Is the door window installed correctly?
YES: Go to Step 2.
NO: Reinstall the door window glass. (Refer to DOOR GLASS AND REGULATOR ). Then go to Step 4.
- STEP 2. Check the door sash.
Q: Is the door sash in good condition?
YES: Go to Step 3.
NO: Repair or replace door sash, then go to Step 4.
- STEP 3. Inspect the window regulator assembly.
Q: Is the window regulator assembly in good condition?
YES: Go to Step 4.
NO: Repair or replace the window regulator assembly, then go to Step 4.
- STEP 4. Retest the system.
Q: Does the door window operate correctly?
YES: The procedure is complete.
NO: Return to Step 1.