| When power switch is turned "ON," no power is available. |
1 |
INSPECTION PROCEDURE 1: WHEN POWER SWITCH IS TURNED "ON," NO POWER IS AVAILABLE |
| Remote controlled radio switch |
When remote controlled radio power switch is turned "ON," no power is available. But radio, CD player and CD changer power switch is available. < Vehicles with audio amplifier > |
2 |
INSPECTION PROCEDURE 2: WHEN REMOTE CONTROLLED RADIO POWER SWITCH IS TURNED "ON," NO POWER IS AVAILABLE. BUT RADIO, CD PLAYER AND CD CHANGER POWER SWITCH IS AVAILABLE. < VEHICLES WITH AUDIO AMPLIFIER > |
| The system does not recognize the remote controlled radio switch (RH) only. < Vehicles with audio amplifier > |
3 |
INSPECTION PROCEDURE 3: THE SYSTEM DOES NOT RECOGNIZE THE REMOTE CONTROLLED RADIO SWITCH (RH) ONLY. < VEHICLES WITH AUDIO AMPLIFIER > |
| The system does not recognize the remote controlled radio switch (LH) only. < Vehicles with audio amplifier > |
4 |
INSPECTION PROCEDURE 4: THE SYSTEM DOES NOT RECOGNIZE THE REMOTE CONTROLLED RADIO SWITCH (LH) ONLY.< VEHICLES WITH AUDIO AMPLIFIER > |
| No sound. < Vehicles with audio amplifier > |
5 |
INSPECTION PROCEDURE 5: NO SOUND. < VEHICLES WITH AUDIO AMPLIFIER > |
| No sound from one speaker. < Vehicles without audio amplifier > |
6 |
INSPECTION PROCEDURE 6: NO SOUND FROM ONE SPEAKER. < VEHICLES WITHOUT AUDIO AMPLIFIER > |
| No sound from one speaker. < Vehicles with audio amplifier > |
7 |
INSPECTION PROCEDURE 7: NO SOUND FROM ONE SPEAKER. < VEHICLES WITH AUDIO AMPLIFIER > |
| Noise |
Noise is present while moving (AM). |
8 |
INSPECTION PROCEDURE 8: NOISE IS PRESENT WHILE MOVING (AM) |
| Noise is present while moving (FM). |
9 |
INSPECTION PROCEDURE 9: NOISE IS PRESENT WHILE MOVING (FM) |
| Sound mixed with noise, only at night (AM). |
10 |
INSPECTION PROCEDURE 10: SOUND MIXED WITH NOISE, ONLY AT NIGHT (AM) |
| Noise is overpowering both AM and FM. |
11 |
INSPECTION PROCEDURE 11: NOISE IS OVERPOWERING BOTH AM AND FM |
| Excessive noise on AM and FM. |
12 |
INSPECTION PROCEDURE 12: EXCESSIVE NOISE ON AM AND FM |
| Noise is detected with engine running. |
13 |
INSPECTION PROCEDURE 13: NOISE IS DETECTED WITH ENGINE RUNNING |
| Noise appears during vibration or shocks. |
14 |
INSPECTION PROCEDURE 14: NOISE APPEARS DURING VIBRATION OR SHOCKS |
| Noise is present while moving (FM). |
15 |
INSPECTION PROCEDURE 15: NOISE IS PRESENT WHILE MOVING (FM) |
| Constant noise. |
16 |
INSPECTION PROCEDURE 16: CONSTANT NOISE |
| Radio |
No reception (AM). |
17 |
INSPECTION PROCEDURE 17: NO RECEPTION (AM) |
| Poor reception. |
18 |
INSPECTION PROCEDURE 18: POOR RECEPTION |
| Distortion on AM and/or FM. |
19 |
INSPECTION PROCEDURE 19: DISTORTION ON AM AND/OR FM |
| Distortion on FM only. |
20 |
INSPECTION PROCEDURE 20: DISTORTION ON FM ONLY |
| Auto select function inoperative, too few automatic stations are selected. |
21 |
INSPECTION PROCEDURE 21: AUTO SELECT FUNCTION INOPERATIVE, TOO FEW AUTOMATIC STATIONS ARE SELECTED |
| Preset stations are erased. |
22 |
INSPECTION PROCEDURE 22: PRESET STATIONS ARE ERASED |
| Only the satellite radio cannot be heard normally. |
28 |
INSPECTION PROCEDURE 28: ONLY THE SATELLITE RADIO CANNOT BE HEARD NORMALLY |
| CD player, CD auto changer |
CD can not be inserted. |
23 |
INSPECTION PROCEDURE 23: CD CAN NOT BE INSERTED |
| No sound (CD only). |
24 |
INSPECTION PROCEDURE 24: NO SOUND (CD ONLY) |
| CD sound skips. |
25 |
INSPECTION PROCEDURE 25: CD SOUND SKIPS |
| Sound quality is poor. |
26 |
INSPECTION PROCEDURE 26: SOUND QUALITY IS POOR |
| CD cannot be ejected. |
27 |
INSPECTION PROCEDURE 27: CD CANNOT BE EJECTED |