Symptom Chart
CAUTION:
During diagnosis, a DTC code associated with other system may be set when the ignition switch is turned on with connector(s) disconnected. On completion, confirm all systems for DTC code(s). If DTC code(s) are set, erase them all.
SYMPTOM CHART
| SYMPTOM | INSPECTION PROCEDURE NO. | REFERENCE PAGE | |
|---|---|---|---|
| Communication with scan tool is not possible | Communication with all systems is impossible | - | For < 2.4L Engine >, SYMPTOM PROCEDURES
. For < 3.8L Engine >, SYMPTOM PROCEDURES . |
| Communication with the PCM only is impossible | - | For < 2.4L Engine >, Symptom Procedures - INSPECTION PROCEDURE 2: SCAN TOOL COMMUNICATION WITH ECM < M/T > OR PCM < A/T > IS NOT POSSIBLE.
. For < 3.8L Engine >, Symptom Procedures - INSPECTION PROCEDURE 2: SCAN TOOL COMMUNICATION WITH ECM < M/T > OR PCM < A/T > IS NOT POSSIBLE. . |
|
| Driving impossible | Engine does not start | 1 | - |
| Does not move forward | 2 | - | |
| Does not move backward | 3 | - | |
| Does not move (forward and backward) | 4 | - | |
| Malfunction when moving selector into gear | Engine stalls when moving selector lever from "N" to "D" or "N" to "R" | 5 | - |
| Shift shock when shifting from "N" to "D" and long delay | 6 | - | |
| Shift shock when shifting from "N" to "R" and long delay | 7 | - | |
| Shift shock when shifting from "N" to "D" and "N" to "R" and long delay | 8 | - | |
| Malfunction when shifting | Shift shock and slipping | 9 | - |
| Does not shift properly | Early or late shifting in all gears | 10 | - |
| Early or late shifting in some gears | 11 | - | |
| Does not shift | No diagnostic trouble codes | 12 | - |
| Malfunction while driving | Poor acceleration | 13 | - |
| Vibration | 14 | - | |
| Shift switch assembly system | 15 | - | |
| Shift position indicator light system | 16 | - | |