Headlight Automatic Shutdown Function

The headlight automatic shutdown function is activated with the following procedures. What's more, the user can switch the operations Yes/No mode and operation conditions from the adjustment function. Refer to ADJUSTMENT PROCEDURES OF SWS FUNCTION for adjustment methods and adjustment details (post-adjustment operations).

1. Ignition Switch: ON or ACC
2. Headlight switch: ON
3. Driver's door: Open (Driver's door switch: ON)
4. Ignition Switch: LOCK (OFF)

Restoration conditions from automatic light shutdown taking effect with the headlight automatic shutdown function.

• Turn OFF the headlight switch and then turn ON the headlight switch again.
  NOTE: The lights may dim again 3 minutes after the lights are restored with the headlight switch depending on the settings (adjustment functions).
• Turn the ignition switch from the "LOCK" (OFF) position to the ON position.

The headlight automatic shutdown function are controlled by the Simplified Wiring System (SWS). For troubleshooting, refer to SWS DIAGNOSIS .