Section 41 (MULTIPORT Fuel Injection (MFI 2.4L) - RALLIART - (1 Of 6))

• General Description
  • Notes
  • Fuel Injection Control
  • Throttle Valve Opening Control
  • Idle Air Control
  • Ignition Timing Control
  • Diagnostic Test Mode
  • Other Control Functions
    • Fuel Pump Control
    • A/C Compressor Clutch Relay Control
    • Engine Oil Control Valve Control
    • Fan Relay Control
    • Generator Output Current Control
    • Evaporative Emission Purge Control
    • EGR Control
  • MULTIPORT Fuel Injection (MFI) System Diagram
• MULTIPORT Fuel Injection (MFI) Diagnosis
  • Troubleshooting Strategy
  • Diagnostic Function
    • Malfunction Indicator Lamp (Service Engine Soon Or Check Engine Lamp)
    • How To Connect The Scan Tool (Mut-III)
    • How To Read And Erase Diagnostic Trouble Codes.
    • How To Read Data List
    • How To Perform Actuator Test
    • PROVISIONAL Diagnostic Trouble Codes [MUT-III OBD-II Test Mode - Results (Mode 7)]
    • Mode 6 Reference Table
    • Diagnostic By Diagnostic Test Mode II (Increased Sensitivity)
    • On-Board Diagnostics
    • OBD - II Drive Cycle
    • Drive Cycle Pattern List
      • Notes
      • Procedure 1
      • Procedure 2
      • Procedure 3
      • Procedure 4
      • Procedure 5
      • Procedure 6
    • System Readiness Test Status
      • Purpose
    • Overview
  • Fail-Safe Function Reference Table
  • Diagnostic Trouble Code Chart
  • Symptom Chart
    • Notes
    • Problem Symptoms Table (For Your Information)