Fastener Tightening Specifications
FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| Immobilizer-ECU mounting screws | 1.2 +/- 0.1 N.m (11 +/- 1 in-lb) |
| Engine coolant temperature sensor | 30 +/- 9 N.m (22 +/- 7 in-lb) |
| Headlight assembly mounting bolts | 4.9 +/- 0.7 N.m (44 +/- 6 in-lb) |
| Fog light assembly mounting bolts | 4.9 +/- 0.7 N.m (44 +/- 6 in-lb) |
| Rear combination light mounting screws | 1.5 +/- 0.2 N.m (13 +/- 2 in-lb) |
| High-mounted stoplight mounting nuts | 5.0 +/- 1.0 N.m (44 +/- 9 in-lb) |
| Horn mounting bolts | 21 +/- 4 N.m (16 +/- 2 ft-lb) |
| Tweeter mounting screws | 1.5 +/- 0.5 N.m (14 +/- 4 in-lb) |
| Front and rear door speaker mounting screws | 1.5 +/- 0.5 N.m (14 +/- 4 in-lb) |
| Woofer mounting screws | 1.5 +/- 0.5 N.m (14 +/- 4 in-lb) |
| Amplifier mounting bolts | 5.0 +/- 1.0 N.m (44 +/- 9 in-lb) |
| Antenna base assembly mounting bolts | 9.0 +/- 2.0 N.m (80 +/- 17 in-lb) |
| Connector bracket mounting nut | 5.0 +/- 1.0 N.m (44 +/- 9 in-lb) |