LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2005 >> Endeavor LS, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Chassis Electrical >> Fog Light >> On-Vehicle Service >> Bulb Replacement

Bulb Replacement

  1. Disconnect the fog light connector behind the bumper.
  2. Remove the socket by twisting it counterclockwise.
    Fig 1: Removing Socket
    G02367588Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Replace the bulb, and then install the socket by twisting it clockwise.