LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2004 >> Outlander XLS, FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Power Brake Booster >> Removal

Power Brake Booster: Removal

NOTE: Numbers in parenthesis refer to numbers in illustration.
  1. Disconnect fluid level sensor connector. See Figure .
  2. Disconnect brake lines.
  3. Remove master cylinder.
  4. Disconnect vacuum hose (10).
  5. Remove snap pin.
  6. Remove pin assembly.
  7. Remove clevis.
  8. Remove brake booster from engine compartment.
scientia non olet · About LEMON Manuals