LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2004 >> Outlander XLS, FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Master Cylinder Assembly >> Removal

Master Cylinder Assembly: Removal

  1. Remove air intake hose and air cleaner.
  2. Disconnect brake fluid level sensor connector. See Fig 1 .
  3. Remove reservoir cap assembly
  4. Remove reservoir.
  5. Remove brake fluid level sensor.
  6. Remove reservoir hose.
  7. Disconnect brake lines.
  8. Remove proportioning valves (if equipped).
  9. Remove O-rings.
  10. Remove master cylinder.
Fig 1: Exploded View Of Master Cylinder Assembly & Brake Booster
G00313509Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals