LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2004 >> Outlander LS, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Emission Control System >> Evaporative Emission Canister And Fuel Tank Pressure Relief Valve >> Inspection >> Evaporative Emission Ventilation Solenoid Check

Evaporative Emission Ventilation Solenoid Check

  1. Connect a hand vacuum pump to nipple (A) of the solenoid.
  2. Check air tightness by applying a vacuum with voltage applied directly from the battery to the evaporative emission ventilation solenoid and without applying voltage.
    Fig 1: Connecting Hand Vacuum Pump To Nipple (A) Of Solenoid
    G00886781Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 2: Applying Voltage Chart
    G00886782Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Measure the resistance between the terminals of the solenoid.

    Standard value: 17 - 21 Ω [at 20°C (68°F)] 

    Fig 3: Measuring Resistance Between Solenoid Terminals
    G00886783Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals