LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2004 >> Montero XLS >> Repair and Diagnosis >> Engine Performance >> System >> Emission Control System >> Emission Control >> Evaporative Emission Canister And Fuel Tank Pressure Relief Valve >> Inspection >> Evaporative Emission Ventilation Solenoid Check

Evaporative Emission Ventilation Solenoid Check

  1. Connect a hand vacuum pump to nipple (A) of the solenoid.
  2. Check air tightness by applying a vacuum with voltage applied directly from the battery to the evaporative emission ventilation solenoid and without applying voltage.
    Fig 1: Connecting Hand Vacuum Pump To Nipple (A) Of Solenoid
    G00891334Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 2: Identifying Battery Voltage Table
    G00891335Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Measuring Resistance Between Terminals Of Solenoid.
    1. Standard value: 17 - 21 Ω [at 20°C (68°F)] 
    Fig 3: Measure Resistance Between Terminals Of Solenoid
    G00891336Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals