LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2003 >> Lancer LS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Gauges & Instrument Panels - Except Evolution >> Symptom Procedures >> Inspection Procedure 6: Combination Meter Does Not Work >> Diagnosis >> Step 3: Check The Wiring Harness Between Combination Meter Connector C-01 (Terminal No. 7) And Battery

Step 3: Check The Wiring Harness Between Combination Meter Connector C-01 (Terminal No. 7) And Battery

NOTE: Also check intermediate connector C-129 and joint connector (1) C-05. If intermediate connectors C-129 or joint connector (1) C-05 is damaged, repair or replace the connector.

Are the wiring harness between combination meter connector C-01 (terminal No. 7) and battery in good condition?

scientia non olet · About LEMON Manuals