Test 2: Brake Warning Light Does Not Extinguish
- Disconnect ABS-ECU connector E-106. See Figure . If brake warning light extinguishes replace ABS-ECU. See ABS ELECTRONIC CONTROL UNIT under REMOVAL & INSTALLATION in ANTI-LOCK - MONTERO article. If brake warning light does not extinguish, go to next step.
- Disconnect combination meter 11-pin connector D-03. Inspect combination meter D-03 and ABS-ECU E-106 connectors fro corroded or damaged connectors. Repair as necessary, then retest system. If connectors are okay, and problem persists, go to next step.
- Check Violet/White wire between ABS-ECU and combination meter connector D-03. Repair wiring as necessary then retest system. If wiring is okay, and problem persists, replace combination meter. See appropriate INSTRUMENT PANELS article in ACCESSORIES & EQUIPMENT. Retest system for normal operation.