Disc Brake & Drum Brake Specifications (Eclipse)
BRAKE SPECIFICATIONS (ECLIPSE)
| Application | In. (mm) | ||
|---|---|---|---|
| Disc Runout | |||
| Front | .002 (0.06) | ||
| Rear (3.0L) | ..003 (0.08) | ||
| Disc Thickness (Standard) | |||
| Front | |||
| 2.4L Engine | .94 (24.0) | ||
| 3.0L Engine | 1.02 (26.0) | ||
| Rear | 0.4 (10.0) | ||
| Disc Thickness (Minimum) | |||
| Front | |||
| 2.4L Engine | 0.88 (22.4) | ||
| 3.0L Engine | 0.96 (24.4) | ||
| Rear | .33 (8.4) | ||
| Drum Inside Diameter (Maximum) | 9.0 (229) | ||
| Front Hub End Play | .002 (.05) | ||
| Master Cylinder Inside Diameter | 1.06 (27.0) | ||
| Disc Brake Pad Lining Thickness (Minimum) | .08 (2.0) | ||
| Rear Axle Shaft End Play | .002 (.05) | ||
| Rear Drum Brake Lining Thickness (Minimum) | .04 (1.0) | ||
| Wheel Cylinder Inside Diameter | .750 (19.1) | ||