Gauge Resistance Test
- Remove instrument cluster. See INSTRUMENT CLUSTER
under REMOVAL & INSTALLATION.
- On Montero Sport, check resistance between temperature gauge terminals at rear of cluster. On Montero models, check resistance at instrument cluster connectors D-03 and D-05. See TEMPERATURE GAUGE RESISTANCE SPECIFICATIONS
table. See Fig 1
on Montero Sport models. See Figure
and Figure
on Montero models.
TEMPERATURE GAUGE RESISTANCE SPECIFICATIONS
| Application & Terminals |
Ohms |
| Montero |
| No. 64 & No. 67 |
1 Meg |
| No. 62 & No. 64 |
1 Meg |
| No. 64 & No. 25 |
210 |
| No. 64 & No. 11 |
210 |
| Montero Sport |
| A & B |
103 |
| A & C |
88 |
| B & C |
191 |
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA