Montero Sport

Remove foglight switch from instrument panel. Disconnect switch connector. Using an ohmmeter, check switch continuity. With switch off, continuity should exist between terminals No. 3 and 6. With switch on, continuity should exist between terminals No. 1 and 2, and terminals No. 3 and 6. See Fig 2 . If continuity is not as specified, replace foglight switch.

Fig 1: Foglight Switch Connector Terminals (Montero)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Foglight Switch Connector Terminals (Montero Sport)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA