Removal & Installation (Eclipse AWD)
- Raise and support vehicle. Remove wheels. Remove wheel speed sensor (if equipped). On models with drum brakes, remove brake drum and shoes. See REAR BRAKE DRUM & SHOES .
- On models with disc brakes, remove caliper and rotor. On all models, remove axle nut. Remove 4 hub bolts and hub assembly. To install, reverse removal procedure. Tighten hub bolts to specification. See HUB TIGHTENING TORQUE table. Rotate brake drum or disc to ensure free movement.
HUB TIGHTENING TORQUE
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Hub Mounting Bolts | 54-65 (73-88) | |
| Spindle Nut | ||
| Mirage | 127 (172) | |
| 3000GT FWD | 166 (225) | |