LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1999 >> Eclipse Spyder GS-T, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Disc Brake Pads >> Removal & Installation (3000GT AWD)

Removal & Installation (3000GT AWD)

  1. Raise and support vehicle. Remove front wheels. Remove clip, brake pad retaining pins and spring. Remove shims and pads from caliper. Note location of shims for reassembly.
  2. Compress caliper pistons fully in bores. Install shims on brake pads. Install brake pads. Install spring clip, pad retaining pins and clip. Start engine. Depress brake pedal several times to expand caliper piston. Check brake fluid level.
scientia non olet · About LEMON Manuals