LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1999 >> Eclipse Spyder GS-T, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Component Tests >> Voltmeter >> Circuit Test (Montero Sport)

Circuit Test (Montero Sport)

  1. Remove multi-meter assembly from top of dashboard. Check voltage between ground and multi-meter harness-side connector terminal No. 10 (Red/Black wire). If voltage reading is about 12 volts, go to step  4. If voltage reading is not about 12 volts, go to next step.
  2. Check harness connector to multi-meter assembly. Repair as necessary. If connector is okay, check circuit between multi-meter harness connector and fusible link No. 6. See WIRING DIAGRAMS . Repair as necessary. If circuit is okay, go to next step.
  3. Turn ignition on. Check voltage between ground and multi-meter harness-side connector terminal No. 11 (Black/White wire). See WIRING DIAGRAMS . If voltage reading is about 12 volts, problem is intermittent. If voltage reading is not about 12 volts, go to next step.
  4. Check harness connector to multi-meter assembly. Repair as necessary. If connector is okay, check circuit between multi-meter assembly harness connector and ignition switch. See WIRING DIAGRAMS . Repair as necessary. If circuit is okay, go to next step.
  5. Turn ignition off. Check continuity between ground and multi-meter assembly harness-side connector terminal No. 3 (Black wire). If continuity is present, problem is intermittent. If continuity is not present, go to next step.
  6. Check harness connector to multi-meter assembly. Repair as necessary. If connector is okay, check multi-meter assembly harness connector ground circuit. See WIRING DIAGRAMS . Repair as necessary. If circuit is okay, replace multi-meter assembly.
scientia non olet · About LEMON Manuals