LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1999 >> Eclipse Spyder GS-T, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Component Tests >> Temperature Gauge >> Circuit Test

Circuit Test

  1. Disconnect temperature sender wire from sending unit. Connect a 12-volt, 3.4-watt test light between connector terminal and ground.
  2. Turn ignition on. If test light flashes and temperature gauge needle moves, go to SENSOR RESISTANCE TEST . If test light does not flash or gauge needle does not move, repair wiring to sending unit.
scientia non olet · About LEMON Manuals