Resistance Test
- Remove instrument cluster. See INSTRUMENT CLUSTER under REMOVAL & INSTALLATION. On 3000GT, remove air distribution duct and combination gauges.
- On all models, check resistance between appropriate terminals of instrument cluster or combination gauges. See Fig 1, Fig 2, Fig 3, Fig 4, Fig 5, Fig 6 or Fig 7 . See FUEL GAUGE RESISTANCE SPECIFICATIONS table. If resistance readings are not as specified, replace fuel gauge.
FUEL GAUGE RESISTANCE SPECIFICATIONS
| Application | (1) Terminals (Pins) | Ohms | ||
|---|---|---|---|---|
| Eclipse | A & B | 102-152 | ||
| A & C | 112-132 | |||
| B & C | 219-279 | |||
| Galant | A & B | 87 | ||
| A & C | 98 | |||
| B & C | 95 | |||
| Mirage | A & B | 80-98 | ||
| A & C | 93-113 | |||
| B & C | 173-211 | |||
| Montero | No. 4 & 8 | 104-127 | ||
| No. 4 & 6 | 132-162 | |||
| No. 6 & 8 | 71-87 | |||
| Montero Sport | A & B | 107 | ||
| A & C | 85 | |||
| B & C | 192 | |||
| 3000GT | A & B | 254 | ||
| A & C | 101 | |||
| B & C | 153 | |||
|
||||