LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1996 >> Galant S, Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Rear Suspension Assembly >> Removal

Rear Suspension Assembly: Removal

  1. Remove rear seat to access upper strut mounting nuts. Mark upper strut mounting stud and body for reassembly reference. Remove nuts. Raise and support vehicle.
  2. Remove brake drum. Disconnect parking brake cable. Disconnect and plug hydraulic brake hose. Remove rear ABS sensor connector. Unbolt upper arm brackets from frame. Remove frame grommet to access trailing arm front bolt. Disconnect trailing arm.See Figure .
  3. Remove center exhaust pipe. Support crossmember with transmission jack. Remove nuts connecting rear suspension crossmember to body. Lower rear suspension assembly.
scientia non olet · About LEMON Manuals