LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1996 >> Eclipse Spyder GS-T, Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Shock & Strut Assemblies >> Removal

Shock & Strut Assemblies: Removal

  1. Remove trunk side trim or shock/strut access cover. Raise and support vehicle. Remove wheel assembly.
    CAUTION: On models with spring assisted shock absorbers, DO NOT remove center strut rod nut until spring is compressed.
  2. Support lower arm assembly using jack stands. Remove dust cap from top of shock assembly. Raise lower arm assembly using a jack. Remove mounting nuts, and disconnect upper strut mount from body. Disconnect shock from lower arm or knuckle assembly. Lower jack, and remove shock assembly from vehicle.
scientia non olet · About LEMON Manuals