LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1996 >> Eclipse Spyder GS-T, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Component Testing >> Boost Pressure Gauge >> Resistance Test (Turbo)

Resistance Test (Turbo)

  1. Remove instrument cluster from instrument panel. See INSTRUMENT CLUSTER  under REMOVAL & INSTALLATION.
  2. Measure resistance between boost pressure gauge terminals on back of instrument cluster or combination gauges using ohmmeter. SeeFig 1 . Resistance should be 72 ohms. If resistance is not as specified, replace gauge.
Fig 1: Boost Pressure Gauge Test Terminals (Turbo)
G96J06407Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals