LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1994 >> Eclipse Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [B] & 2.0L 4-CYL - VINS [E,F] >> Removal & Installation >> Rocker Arm & Valve Lash Adjuster >> Inspection (1.8L & 2.0L SOHC)

Inspection (1.8L & 2.0L SOHC)

  1. Before removing rocker arms from engine, insert a small wire through rocker arm bleed hole and into lash adjuster. With wire lightly holding lash adjuster internal check ball down, move rocker arm up and down to check for free play. If no free play is present, replace adjuster.
  2. Inspect rocker arms and shafts for wear and damage. Check distributor drive gear for tooth damage and wear. Replace components as necessary.
  3. Check camshaft journal diameter and lobe height. Replace camshaft if journal diameter and lobe height are not within specification. See appropriate table under CAMSHAFT SPECIFICATIONS  under ENGINE SPECIFICATIONS.
scientia non olet · About LEMON Manuals