LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1994 >> Eclipse Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [B] & 2.0L 4-CYL - VINS [E,F] >> Removal & Installation >> Exhaust Manifold >> Removal (2.0L DOHC Turbo)

Removal (2.0L DOHC Turbo)

  1. Drain engine coolant and engine oil. Remove condenser fan assembly. Disconnect and remove O2 sensor. Remove dipstick tube.
  2. Disconnect air intake hose from turbo. Disconnect vacuum hose from turbo wastegate valve. See Figure. Disconnect boost pressure signal line from turbo output hose.
  3. Disconnect turbo output hose from turbo. Remove upper and lower heat shields from manifold. Remove power steering pump with hoses connected, and support aside. Remove power steering pump bracket and engine hanger.
  4. Disconnect water hose from water pipe "A". Disconnect water pipe "B" from engine (flare nut fitting). See Figure. Remove oil pressure and oil return pipes from between engine and turbo. Disconnect exhaust pipe from turbo. Remove turbo and exhaust manifold assembly. Separate turbo from exhaust manifold.
CAUTION: Apply light oil to inner surface of flared area on water pipe (flare nut fitting) before connecting to engine.
scientia non olet · About LEMON Manuals