LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1994 >> Eclipse Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [B] & 2.0L 4-CYL - VINS [E,F] >> Removal & Installation >> Cylinder Head >> Removal (2.0L DOHC)

Removal (2.0L DOHC)

  1. Release residual fuel pressure from fuel system. See FUEL PRESSURE RELEASE  under REMOVAL & INSTALLATION. Drain cooling system. Remove air cleaner assembly.
  2. Disconnect all necessary electrical connectors, vacuum hoses, coolant hoses, fuel hoses and cables. Remove timing belt. See TIMING BELT  under REMOVAL & INSTALLATION.
  3. Remove rocker cover. On non-turbo engines, disconnect exhaust pipe from exhaust manifold. On turbo engines, disconnect exhaust manifold from turbo.
  4. On all models, loosen cylinder head bolts (in 2-3 steps) in proper sequence using Cylinder Head Bolt Wrench (MD998051-01). See Figure. Remove cylinder head and gasket.
scientia non olet · About LEMON Manuals