LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1994 >> Eclipse Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [B] & 2.0L 4-CYL - VINS [E,F] >> Overhaul >> Cylinder Block Assembly >> Fitting Pistons

Fitting Pistons

  1. Measure piston skirt diameter at 90-degree angle to piston pin. If piston diameter is not within specification, replace piston. See appropriate table under PISTONS, PINS & RINGS SPECIFICATIONS  under ENGINE SPECIFICATIONS.
  2. Measure cylinder bore diameter at 3 places: near top of bore, bottom of bore and center of bore. If cylinder bore diameter or taper is not within specification, machine cylinder bore. See appropriate table under CYLINDER BLOCK SPECIFICATIONS  under ENGINE SPECIFICATIONS.
  3. If piston-to-cylinder bore clearance is not within specification, replace piston and/or machine cylinder bore. See appropriate table under PISTONS, PINS & RINGS SPECIFICATIONS  under ENGINE SPECIFICATIONS.
scientia non olet · About LEMON Manuals