LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1994 >> Eclipse Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [B] & 2.0L 4-CYL - VINS [E,F] >> Engine Oiling >> Oil Pump & Front Cover >> Removal (2.0L DOHC)

Removal (2.0L DOHC)

  1. Remove timing belt and sprockets. See TIMING BELT  under REMOVAL & INSTALLATION. Remove oil pan. See OIL PAN  under REMOVAL & INSTALLATION. Remove oil filter. Using Socket (MD998054), remove oil pressure switch.
  2. Remove oil pressure gauge sending unit. On turbo models, remove oil cooler and oil cooler by-pass valve. Remove oil jets and check valves from cylinder block.
  3. On all models, remove oil pick-up tube, oil filter bracket and gasket. Remove plug, gasket, spring and relief plunger. Using Plug Cap Wrench (MD998162), remove plug cap and "O" ring from front cover.
  4. Remove front cover and gasket from cylinder block. Remove silent shaft and crankshaft oil seals from front cover. Remove oil pump cover. Note timing marks on oil pump gears, and remove gears from front cover.
scientia non olet · About LEMON Manuals