LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1993 >> Precis Standard >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear (Fwd) >> Removal & Installation >> Rear Suspension Assembly >> Installation

Rear Suspension Assembly: Installation

  1. To install, reverse removal procedure. Check upper and lower spring seats for proper installation. Tighten bolts to specification. See TORQUE SPECIFICATIONS table at end of article.
  2. Tighten suspension arm nuts and shock absorber bolts to specification with vehicle at normal operating height and no load. Check wheel bearings (if required). See WHEEL BEARING under ADJUSTMENTS. Bleed and adjust brakes. Check wheel alignment.
scientia non olet · About LEMON Manuals