LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1993 >> Eclipse Base, Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear (AWD & Fwd) >> Removal & Installation >> Shock Absorbers >> Removal

Shock Absorbers: Removal

  1. Remove trunk side trim or shock/strut access cover.
  2. Raise and support vehicle. Remove wheel assembly. Support lower arm assembly using jackstands.
    CAUTION: On models with spring assisted shock absorbers, DO NOT remove center strut rod nut until spring is compressed.
  3. Remove dust cap from top of shock assembly. Raise lower arm assembly using a jack. Remove mount nuts, and disconnect upper shock mount from body. Disconnect shock from lower arm assembly. Lower jack, and remove shock assembly from vehicle.
scientia non olet · About LEMON Manuals