Brake Shoes &/Or Pads: Remove & Replace

Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
All,Both Axles		1.8		B
Front,Both Sides		1.0		B
Rear,Both Sides		1.0		B
Combination Procedure: BRAKE HOSE: Replace: Includes: Bleed System.
Power-Assist (Non-ABS), Each Additional		0.2		B
Power-Assist (Non-ABS), One		0.3		B
Combination Procedure: CALIPER: Overhaul: Includes: Bleed System.
Power-Assist (Non-ABS), One		0.5		B
Combination Procedure: CALIPER: Replace: Includes: Bleed System.
Power-Assist (Non-ABS), One		0.3		B
Combination Procedure: DISC ROTOR: Remove and Install for Refinishing: NOTE: This operation does not apply to FWD vehicles. If on vehicle refinishing is not possible, use appropriate repair operation.
4WD		0.7		B
Combination Procedure: DISC ROTOR: Replace:
Front		0.7		B
Combination Procedure: PARKING BRAKE SHOE & LINING: Replace:
		0.8		B
Combination Procedure: WHEEL BEARING: Repack:
4WD, Front,Both Sides		0.8		B
Combination Procedure: WHEEL BEARING: Replace:
4WD, Front,Both Sides		0.8		B
Combination Procedure: WHEEL CYLINDER: Overhaul: Includes: Bleed System.
One,Off Vehicle		0.5		B
One,On Vehicle		0.3		B
Combination Procedure: WHEEL SEAL: Replace: Semi-Floating Axle.
Rear Axle,Both		0.8		B
Rear Axle,One		0.6		B