LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1992 >> Expo SP, FWD, Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Trailing Arm >> Disassembly

Trailing Arm: Disassembly

  1. Using Bushing Arbor (MB990849) and Base (MB990646), remove bushing. Remove connecting rod bolt and nut. Install Rod Remover/Installer (MB991254) on trailing arm.
  2. Apply lubricant to sliding areas marked "A" in Fig. Fig 1. Install bolt "B" to trailing arm at point shown. Turn threaded shaft "C" on remover/installer to remove connecting rod.
Fig 1: Removing Connecting Rod From Front Trailing Arm (Eclipse AWD, Galant AWD, Stealth AWD & 3000GT AWD)
G91F01926Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals