Removal (Colt Vista AWD, Diamante, Eclipse AWD, Expo/Expo LRV AWD, Galant AWD, Stealth, Summit Wagon AWD & 3000GT)
- Raise and support vehicle. Support rear suspension assembly using a transaxle jack. Remove self-locking nuts and crossmember brackets. Remove bracket bolt for parking brake cable and speed sensor cable (if equipped).
- Remove stabilizer bar bracket and bushings. Remove stabilizer link nut. Remove lower joint cups and stabilizer rubber. Remove stabilizer link-to-stabilizer bar nut, and remove stabilizer link. Lower transaxle jack slightly, and remove stabilizer bar.