Removal (Colt Vista, Diamante, Expo/Expo LRV, Montero, Stealth, Summit Wagon, & 3000GT

1. Raise and support vehicle. Remove rear wheel(s). Disconnect rear speed sensor. Remove rear disc brake calipers and rotors. Remove hub cap, flange nut and washer. See Fig 1
2. Remove rear hub bearing and adjusting wheel spring. Remove shoe hold-down cup, spring and pin. Note how shoe-to-anchor spring is installed, and then remove adjuster and shoe-to-anchor spring. Remove strut and return spring. Remove clip and shoe and lining assembly.

Fig 1: Exploded View Of Parking Brake Assembly (Typical)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

CAUTION: Shoe-to-anchor spring must be installed correctly for proper functioning of parking brakes.