LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1992 >> 3000GT SL, Standard >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension - Electronic >> Component Testing >> Vehicle Speed Sensor >> Non-Turbo

Vehicle Speed Sensor: Non-Turbo

  1. Remove knee protector, steering column covers and meter bezel. Disconnect speedometer cable and electrical harness. Remove instrument cluster.
  2. Using an ohmmeter, check circuit continuity between reed switch (speedometer) terminal and ground terminal of combination meter. See Fig 1. Rotate speedometer input shaft and ensure continuity pulses on and off several times per shaft revolution. Replace combination meter if continuity does not pulse with shaft rotation.
Fig 1: Testing Vehicle Speed Sensor (Non-Turbo)
G92J00744Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals