LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1991 >> Precis Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.5L 4-CYL - VINS [A,J,X] & 1.6L 4-CYL - VIN [Y] >> Torque Specifications >> Torque Specifications (1.5L Precis)

Torque Specifications (1.5L Precis)

TORQUE SPECIFICATIONS (1.5L PRECIS)

Application Ft. Lbs. (N.m)
Camshaft Sprocket Bolt 48-55 (65-75)
Camshaft Thrust Case Bolt 14-20 (19-27)
Connecting Rod Cap Nut 24-26 (32-35)
Crankshaft Sprocket Bolt 52-74 (70-100)
Cylinder Head Bolt
Cold Engine (1) 52-55 (70-75)
Hot Engine (2) 59-63 (80-85)
Drive Plate Bolt (A/T) 96-103 (130-140)
Exhaust Manifold Nut 11-15 (15-20)
Flywheel Bolt (M/T) 96-103 (130-140)
Front Cover Bolt 10-11 (14-15)
Intake Manifold Nut 11-15 (15-20)
Main Bearing Cap Bolt 37-40 (50-54)
Rocker Arm Shaft Bolt 15-20 (20-27)
Timing Belt Tensioner Bolt 15-20 (20-27)
INCH Lbs. (N.m.) 
Camshaft Rear Cover Bolt 70-86 (7-10)
Rocker Cover Bolt 13-18 (1.5-2.0)
Timing Belt Cover Bolt 86-104 (10-12)
(1) Torque head bolts in 2-3 stages, in sequence with engine cold. Finish with specified torque.
(2) Tighten in sequence. See Figure.