LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1991 >> Precis Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.5L 4-CYL - VINS [A,J,X] & 1.6L 4-CYL - VIN [Y] >> Removal & Installation >> Rocker Arm & Valve Lash Adjuster >> Installation (1.5L)

Installation (1.5L)

  1. On 12-valve models, turn camshaft until cam sprocket dowel pin is at 12 o'clock position. On all models, install rocker arm assembly. See Figure and Figure .
  2. Tighten rocker arm assembly retaining bolts to specification. See TORQUE SPECIFICATIONS . Adjust valve clearance. See VALVE CLEARANCE ADJUSTMENT  under ADJUSTMENTS. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals