LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1991 >> Precis Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.5L 4-CYL - VINS [A,J,X] & 1.6L 4-CYL - VIN [Y] >> Removal & Installation >> Intake Manifold >> Removal & Installation (Precis)

Removal & Installation (Precis)

  1. Release fuel pressure. See FUEL PRESSURE RELEASE . Remove air intake hose, and disconnect accelerator cable. Disconnect necessary coolant hoses, vacuum hoses, and electrical connectors. Remove air intake plenum and gasket.
  2. Remove fuel rail with fuel injectors and pressure regulator attached. Take care that fuel injectors do not fall from fuel rail. Remove fuel injector grommets from intake manifold. Remove coolant outlet, gasket, and thermostat. Remove distributor, ignition coil, and intake manifold. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals