Rear Brake Drum & Shoes (Mirage): Installation

1. To install, reverse removal procedure. Apply Lubriplate to backing plate bosses, adjuster assembly threads and parking brake lever pin.
2. Set adjustment assembly so brake shoes lightly contact brake drum. Depress brake pedal to center shoes and check pedal travel. Rotate brake drum to ensure free movement.

Fig 1: Exploded View of Rear Brake Assembly (Galant)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Exploded View of Rear Brake Assy (Montero, Pickup, & Van/Wagon)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 3: Exploded View of Rear Brake Assembly (Mirage)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.