LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1990 >> Eclipse Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN (T), 2.0L VIN (R,U,V) & 2.4L VIN (W) 4-Cylinder >> Removal & Installation >> Oil Pan >> Removal

Oil Pan: Removal

Remove oil pan mounting bolts. Tap special tool (MD998727) in between cylinder block and oil pan. Remove oil pan by placing a brass bar at correct end of special tool and then tapping with hammer.

CAUTION: DO NOT  use a screwdriver, a chisel or a similar tool when removing oil pan.
scientia non olet · About LEMON Manuals