LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1990 >> Eclipse Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN (T), 2.0L VIN (R,U,V) & 2.4L VIN (W) 4-Cylinder >> Removal & Installation >> Exhaust Manifold >> Removal (2.0L DOHC Turbo)

Removal (2.0L DOHC Turbo)

  1. Drain engine coolant and engine oil. Remove condenser fan assembly. Disconnect oxygen sensor connector. Remove dipstick tube.
  2. Disconnect air intake hose from turbo. Disconnect vacuum hose from turbo wastegate valve diaphragm. See Figure. Disconnect boost pressure signal line from turbo output hose.
  3. Disconnect turbo output hose from turbo. Remove upper and lower heat shields from manifold. Remove power steering pump with hoses connected, and support aside. Remove power steering pump bracket and engine hanger.
  4. Disconnect water hose from water pipe "A". Disconnect water pipe "B" from engine (flare nut fitting). Remove oil pressure and oil return pipes from between engine and turbo. Disconnect exhaust pipe from turbo. Remove turbo and exhaust manifold assembly. Separate turbo from exhaust manifold.
scientia non olet · About LEMON Manuals