LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1990 >> Eclipse Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN (T), 2.0L VIN (R,U,V) & 2.4L VIN (W) 4-Cylinder >> Removal & Installation >> Engine >> Removal (Pickup)

Removal (Pickup)

  1. Release residual fuel pressure from fuel system. See FUEL PRESSURE RELEASE .
    NOTE: Manufacturer suggests removing engine and transaxle as a unit.
  2. Remove hood. Drain cooling system, engine oil and transmission oil. On 4WD vehicles, remove transfer case. On all models, remove transmission. For automatic transmission vehicles, see the AUTO TRANS REMOVAL article in the TRANSMISSION SERVICING section. For manual transmission vehicles, see appropriate CLUTCH article in the CLUTCHES section.
  3. Remove radiator and cooling fan assembly. Disconnect all necessary electrical connectors, vacuum hoses, fuel hoses, coolant hoses and cables. Leaving hoses connected, remove power steering pump and A/C compressor and support aside.
  4. Disconnect exhaust pipe from exhaust manifold. Using suitable lifting device, support weight of engine. Remove bolts from engine mounting brackets. Remove engine.
scientia non olet · About LEMON Manuals