LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1990 >> Eclipse Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN (T), 2.0L VIN (R,U,V) & 2.4L VIN (W) 4-Cylinder >> Removal & Installation >> Cylinder Head >> Removal (2.0L DOHC)

Removal (2.0L DOHC)

  1. Release residual fuel pressure from fuel system. See FUEL PRESSURE RELEASE .
  2. Drain cooling system. Disconnect all necessary electrical connectors, vacuum hoses, coolant hoses, fuel hoses and cables. Remove timing belt. See TIMING BELT .
  3. Remove rocker cover. On non-turbo engines, disconnect exhaust pipe from exhaust manifold. On turbo engines, remove exhaust manifold and turbo. See EXHAUST MANIFOLD .
  4. On all models, loosen cylinder head bolts (in 2-3 steps) in proper sequence using Cylinder Head Bolt Wrench (MD998051-01). See Figure. Remove cylinder head and gasket.
scientia non olet · About LEMON Manuals