LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1989 >> Precis Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.5L 4-CYL - VINS [J,X] & 1.6L 4-CYL - VINS [Y,Z] >> Removal & Installation >> Exhaust Manifold >> Removal (1.5L & 1.6L Non-Turbo)

Removal (1.5L & 1.6L Non-Turbo)

  1. On 1.6L models, remove condenser fan (A/C models) and cooling fan motor assemblies.
  2. On all models, disconnect exhaust pipe from manifold. Remove exhaust manifold outer heat shield, oxygen sensor and engine hanger (if equipped) from manifold. Remove manifold bolts, manifold, gasket and manifold inner heat shield.
scientia non olet · About LEMON Manuals